新闻动态
NEWS
/
/
/
Bending machine: specific components and its use steps!

Bending machine: specific components and its use steps!

  • Time of issue:2020-09-04 18:03
  • Views:

Bending machine: specific components and its use steps!

(Summary description)If the operation of the factory involves bending operations, then you need to use a bending machine. Do you know what parts it consists of? Mainly the slider part, the workbench, the synchronization system, and the stopper mechanism, etc. ......

  • Time of issue:2020-09-04 18:03
  • Views:
Information

If the operation of the factory involves bending operations, then you need to use a bending machine. Do you know what parts it consists of? Mainly the slider part, the workbench, the synchronization system, and the stopper mechanism, etc. . After understanding its components. It is also necessary to understand its use steps, so as to help us use it in the correct way. In the article, the editor will give you a detailed introduction to the components and use steps of the bending machine. Get up and see!

  

安徽省亚威机床制造有限公司

 

What are the components of the bending machine?

The overall structure of the bending machine is very complex, because its entire operation process involves many components. Let's take a look at its components:

1. Slider part

Adopt hydraulic transmission, the slider part is composed of slider, oil cylinder and mechanical stop fine-tuning structure. The left and right oil cylinders are fixed on the frame, the piston drives the slider to move up and down through hydraulic pressure, and the mechanical stop is controlled by the numerical control system to adjust the value.

2. Workbench part

Operated by the button box, the motor drives the material stopper to move forward and backward, and the distance of movement is controlled by the numerical control system. The minimum reading is 0.01 mm, and there are limit switches at the front and rear positions.

3. Synchronization system

The machine is composed of a mechanical synchronizing mechanism composed of a torsion shaft, a swing arm, a joint bearing, etc., with a simple structure, stable and reliable performance, and high synchronization accuracy. The mechanical stop is adjusted by the motor, and the numerical control system controls the value.

4. Stopper mechanism

The stopper is driven by a motor, and the two screw rods move synchronously through chain operation, and the numerical control system controls the stopper size.

  

安徽省亚威机床制造有限公司

 

The steps of using the bending machine:

After understanding the components of the bending machine, the next step is to understand its use steps. Understanding its use steps can help you use it better:

1. First, the hydraulic bending machine is powered on, turn on the key switch on the control panel, and then press the oil pump to start, so that you can hear the rotation of the oil pump.

2. Stroke adjustment, the use of the bending machine must pay attention to the adjustment of the stroke, and a test drive must be performed before bending. When the upper die of the bending machine goes down to the bottom, a gap of plate thickness must be guaranteed. Otherwise, it will cause damage to the mold and the machine. The adjustment of the stroke also has electric quick adjustment and manual gastric adjustment.

3. For the selection of the bending notch of the hydraulic bending machine, it is generally necessary to select a notch with a width of 8 times the thickness of the plate. For bending 4mm sheet, you need to choose a notch of about 32. The rear gauge adjustment generally has electric quick adjustment and manual fine adjustment.

4. Press the foot switch to start bending. The bending machine is different from the shearing machine. It can be released at any time. When the foot is released, the bending machine stops and continues to descend.

The above is what Xiaobian introduced to you about the components of the bending machine and its use steps. If you have any doubts, please contact us in time!

Relevant Information

Secretary of the Municipal Youth League Committee - Qian Jun came to our company for research and inspection
See more information 白箭头 黑箭头
The secretary of the provincial party committee came to our company to guide the work
See more information 白箭头 黑箭头
District People's Congress representative Chairman Xie came to our company for research
See more information 白箭头 黑箭头

Address:West of Jiubo Science and Technology Park, Bowang Town, Bowang District, Ma'anshan, Anhui

Tel:0555-6762898

这是描述信息
这是描述信息
这是描述信息

About Us

>

Proudct Center

>

News

>

Marketing & Service

>

YAWEI

Scan QR code

Follow us

Anhui Yawei Machine Tool Manufacturing Co., Ltd. All rights reserved.    皖ICP备18020142-1号    Technical support: www.300.cn Nanjing